Radiator Main Fan and Fan Motor

Radiator Main Fan and Fan Motor








REMOVAL
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from the battery.





4) Lift up the vehicle.
5) Remove the under cover.
6) Disconnect the main fan motor connector (A).





7) Remove the heat shield cover from radiator. (AT model)





8) Drain the coolant about 1 l (1.06 US qt, 0.88 Imp qt).
9) Remove the ATF hose from the clip of the radiator main fan motor assembly. (AT model)





10) Lower the vehicle.
11) Remove the air intake duct.
12) Disconnect the over flow hose.
13) Remove the over flow pipe.
14) Remove the reservoir tank.
15) Remove the mounting bolts from radiator main fan motor assembly.





16) Disconnect the radiator inlet hose (A) from the radiator.
17) Remove the hood stay holder (B).





18) Remove the radiator main fan motor assembly from vehicle.

INSTALLATION
Install in the reverse order of removal.








DISASSEMBLY
1) Remove the clip which holds the fan motor connector onto the shroud.
2) Remove the nuts which hold the fan to the fan motor.





3) Remove the bolts which hold fan motor onto shroud.





ASSEMBLY
Assemble in the reverse order of disassembly.