6MT

REPLACEMENT
1) Pull out the oil level gauge.
2) Lift up the vehicle.
3) Drain transmission gear oil completely.

CAUTION: Immediately after the engine has been running, the transmission gear oil is hot. Be careful not to burn yourself.

NOTE:
^ Tighten the drain plug of the transmission gear oil after draining the transmission gear oil.
^ Be sure to use a new gasket.
^ Use TORX bit T70 to remove and install the drain plug on clutch housing side.





4) Lower the vehicle.
5) Pour transmission gear oil through the gauge hole.
Recommended gear oil GL-5 (75W-90) or equivalent
Transmission gear oil capacity 4.1 l (4.3 US qt, 3.6 Imp qt)
6) Check the level of the transmission gear oil.

NOTE:
^ When inserting the level gauge into the transmission gear, align the protrusion on the top of the level gauge with the notch in the gauge hole.
^ Keep the transmission gear oil level to be between the range marked on the level gauge.