Front Wiper Motor and Link
Front Wiper Motor and LinkREMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the cowl panel.
3. Disconnect the connector of wiper motor assembly.
4. Remove the bolt, and then remove the wiper assembly.
NOTE: The wiper motor and wiper link is an assembly part and is not to be disassembled.
INSTALLATION
Install in the reverse order of removal.
FRONT WIPER
Tightening torque: N.m (kgf.m, ft.lb)
T1: 6.0 (0.61, 4.4)
T2: 20 (2.0, 14.5)