Sunroof Assembly

SUNROOF ASSEMBLY

REMOVAL

1. SEDAN MODEL

1. Disconnect the ground cable from the battery.
2. Remove the roof trim.
3. Disconnect the harness connector of sunroof motor.
4. Remove the glass lid.
5. Remove the drain tube from frame assembly.
6. Remove the assist rail bracket (front) (A) and sunroof bracket (rear) (B).

7. Remove the nuts, and then remove the frame assembly.

2. WAGON MODEL

1. Disconnect the ground cable from the battery.
2. Remove the roof trim.
3. Disconnect the harness connector of the motor assembly.

4. Remove the front and rear glass lid.
5. Remove the attachment bolts (A) on the rear frame bracket of the frame assembly.

6. Remove the drain tube from frame assembly.
7. Remove the frame bracket (A).
8. Remove bolts (B) and nuts (C), then remove the frame assembly.

INSTALLATION

Install in the reverse order of removal.

CAUTION: Be careful not to snag the harness.

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.