Parking Pawl

Parking Pawl

REMOVAL
1) Remove the transmission assembly from vehicle body.
2) Remove the rear wheel speed sensor, and separate the extension case from transmission case.
3) Remove the reduction drive gear. (MP-T model)
4) Remove the center differential carrier. (VTD model)
5) Remove the parking pawl, return spring and shaft.





INSTALLATION
1) Install the parking pawl, return spring and shaft.





2) Install the reduction drive gear. (MP-T model)
3) Install the center differential carrier. (VTD model)
4) Install the rear vehicle speed sensor and extension case.
5) Install the transmission assembly to the vehicle.

INSPECTION
Check the tab of the parking pole on the reduction gear for wear or other damage.