Trunk Lid Lock Assembly
Trunk Lid Lock AssemblyREMOVAL
1. Remove the trunk lid release handle.
2. Disconnect the connectors and remove the cable of the trunk opener.
3. Remove the two bolts to remove the trunk lid lock assembly.
INSTALLATION
Install in the reverse order of removal.
TRUNK LID AND REAR GATE LOCK
Tightening torque: N.m (kgf.m, ft.lb)
T1: 7.5 (0.76, 5.5)
T2: 18 (1.8, 13.3)
T3: 25 (2.5, 18.4)
NOTE:
- Apply grease to the movable part.
- Make sure the lock works correctly after installation.