Scan Tool Testing and Procedures

Inspection Mode

PROCEDURE

WARNING: Observe the traffic law when driving on public roads.

1) Shift the select lever to "D" range, and then drive the vehicle with changing the gear from 1st to 5th.
2) When driving the vehicle at 5th speed of "D" range, set the gear to manual mode and drive the vehicle by downshifting using "-" of the select lever from 5th -* 4th, 4th 3rd, 3rd 2nd, and 2nd 1st.

NOTE: At shifting down, drive the vehicle at least 10 seconds in each speed.

3) Shift the select lever to "R" range and drive the vehicle for 2 seconds or more.