Keyless Entry: Testing and Inspection
INSPECTION1. SYMPTOM CHART
Symptom Chart (Part 1):
Symptom Chart (Part 2):
2. CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION
Step 1-4:
CAUTION: Be sure to reset keyless transmitters from other vehicles that were registered to the inspection target vehicle, and the vehicle to which keyless transmitters were registered for the inspection, to the condition before performing the inspection. (Register the keyless transmitters again.)
3. CHECK KEYLESS ENTRY CONTROL MODULE
Step 1-4:
4. CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT.
Step 1-2:
5. CHECK DOOR SWITCH
Step 1-4:
6. CHECK KEY WARNING SWITCH
Step 1-5:
7. CHECK ROOM LIGHT OPERATION
Step 1-2:
8. CHECK HAZARD LIGHT OPERATION.
Step 1-3:
9. CHECK KEYLESS BUZZER
Step 1-5:
10. CHECK TRUNK LID LOCK ACTUATOR
Step 1-3:
11. CHECK DOOR LOCK SWITCH
Step 1-4:
12. CHECK IGNITION SWITCH ILLUMINATION
Step 1-3:
