Antitheft Motion Sensor: Adjustments
Impact SensorADJUSTMENT
1. CHECK IMPACT SENSOR
1. Remove the key from ignition switch.
2. Close all windows.
3. Close all doors and the rear gate. Leave open the front hood.
4. Press the LOCK button of the keyless transmitter from outside of vehicle.
5. Check that the security indicator light blinks twice within 0.5 seconds in 2 second cycles after 30 seconds.
6. Hit the windshield with your palm continuously and check the security alarm operates. Lift up the front hood approx. 12 cm (4.7 in) or more, and then drop it off to check the operation of security alarm.
7. If NG, adjust the impact sensitivity.
2. IMPACT SENSITIVITY ADJUSTMENT
1. Prepare the Subaru Select Monitor kit.
2. Prepare PC with Subaru Select Monitor installed.
3. Connect USB cable to SDI (Subaru Diagnostic Interface) and PC USB port (Subaru Select Monitor dedicated port).
NOTE: Subaru Select Monitor dedicated port indicates USB port used when Subaru Select Monitor is installed.
4. Connect the diagnosis cable to SDI.
5. Connect SDI to data link connector located in the lower portion of the instrument panel (on the driver's side).
CAUTION: Do not connect scan tools other than the Subaru Select Monitor.
6. Start the PC.
7. Turn the ignition switch to ON (engine OFF), and run the "PC application for Subaru Select Monitor III".
8. On the System Selection Menu, select the {Impact Sensor}.
9. Make a {ECU customizing}.
- Sensitivity can be adjusted in 11 levels (0 to 10).
- Initial setting is 5.
- Smaller number means more sensitive.
- Larger number means less sensitive.
10. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.
NOTE:
- Set the sensor so as not to let the alarm on normal vibration (reclining to the door, hit the ball and etc.).
- Set the sensor to operate the alarm with hitting the door or window glass, etc. continuously like a mayhem by robbery.
- Ask the customer about parking situation for setting, because the alarm operate when the vibration not only the burglar but also the construction etc.