Basic Diagnostic Procedure
Basic Diagnostic ProcedurePROCEDURE
WITH SUBARU SELECT MONITOR
CAUTION:
- Subaru Select Monitor is required for reading DTC, performing diagnosis and reading current data.
- Remove foreign matter (dust, water, oil, etc.) from the body integrated unit connector during removal and installation.
- For model with immobilizer, registration of immobilizer may be needed after the replacement of controller etc. For detailed procedure, refer to the REGISTRATION MANUAL FOR IMMOBILIZER.
NOTE:
- To check harness for broken wires or short circuits, shake trouble spot or connector.
- Check List for Interview
