Intake Air Plenum: Service and Repair

Air Intake Chamber

REMOVAL
1. Remove the collector cover.
2. Loosen the clamp (A) which connects air intake chamber to throttle body.
3. Loosen the clamp (B) which connects intake duct to air intake chamber.
4. Remove the bolt (C) which secures air intake chamber to the collector cover bracket.






5. Disconnect the blow-by hoses, and then remove air intake chamber.

INSTALLATION
Install in the reverse order of removal.

Tightening torque:
Clamp (A), (B): 3.0 N.m (0.3 kgf.m, 2.2 ft.lb)
Bolt (C): 6.5 N.m (0.66 kgf.m, 4.8 ft.lb)