Suspension - Front Stabilizer Bar Rubbing Noise
NUMBER: 05-41-08RDATE: 08/11/09
APPLICABILITY:
2009 and later
Forester
2008 and later Impreza / WRX / STI
2006 and later Tribeca
SUBJECT:
Front Stabilizer Bar Bushings
INTRODUCTION
If you encounter a rubbing type noise coming from the front stabilizer bat; especially at low ambient temperatures, the stabilizer bar bushings may need to be replaced. A modification was made using a different material that is more durable which will eliminate the noise.
PART INFORMATION / STABILIZER BUSHING
PART IDENTIFICATION
REPAIR PROCEDURE/INFORMATION
Refer to the applicable Service Manual for replacement procedure.
Make sure stabilizer bar surface is clean prior to installing new bushing.
When installing new style bushing, both sides should be replaced at the same time.
WARRANTY/CLAIM INFORMATION
For vehicles within the Basic New Car Limited Warranty period, refer to the Subaru Warranty Wizard(TM) for claim information.
Disclaimer