Clear Memory Mode
Clear Memory ModeOPERATION
1. On the [[Main Menu]] display screen, select the {2. Each System Check}.
2. On the [[System Selection Menu]] display screen, select the {Integ. unit mode}.
3. Press the [OK] key after the information of body integrated unit type is displayed.
4. On the [[Integ. unit mode failure diag]] display screen, select {Clear Memory} and press the [OK] key.
5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
NOTE: For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".