Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2009 >> Forester F4-2.5L DOHC Turbo >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Function Setting (Customize)

Function Setting (Customize)

Function Setting (Customize)

OPERATION

1. On the <
> display screen, select {Each System Check}.
2. On the <> display screen, select the {Integ. unit mode}.
3. On the <> display screen, select the {ECM customizing}.
4. Change the setting with UP/DOWN key and set with the [OK] key.
- List of function setting item (ECM customizing)

Part 1:




Part 2:






5. After setting, make sure that vehicle equipment is same as the setting changed in the {Current Data Display & Save}.

CAUTION:
- The above settings must match the actual vehicle equipment.
- Do not change settings other than the above while setting the functions.
- Be sure not to change Factory or Market setting except installation of new body integrated unit.

NOTE: For details concerning the operation procedure, refer to the "PC application help for Subaru Select Monitor".
pro multis · About Operation CHARM