Removal

REMOVAL

1) Set the vehicle on a lift.
2) Set the select lever to "N" range.
3) Lift up the vehicle.
4) Remove the front and center exhaust pipes. (Non-turbo model)
5) Remove the center exhaust pipe. (Turbo model)
6) Remove the snap pin and washer from the shifter arm.





7) Remove the plate assembly from the transmission case.





8) Remove the spring pin and remove the shifter arm.

ST 398791600 REMOVER





9) Remove the two inhibitor switch securing bolts.





10) Remove the inhibitor switch from the transmission.





11) Disconnect the inhibitor switch harness connector from the inhibitor switch.