Power Window Switch: Service and Repair
Power Window Control SwitchREMOVAL
1. MAIN SWITCH
1. Disconnect the ground cable from the battery.
2. Open the cover and remove the screws, then remove the power window main switch panel.
NOTE: Remove it from the cutout portion at the tip of the switch panel.
3. Disconnect the connector.
4. Remove the screws and remove the power window main switch assembly.
2. SUB-SWITCH
1. Open the cover and remove the screws, then remove the power window main switch panel.
NOTE: Remove from the notched part at the edge of the switch panel.
2. Disconnect the connector.
3. Remove the screws and remove the power window main switch assembly.
INSTALLATION
Install in the reverse order of removal.