Crankshaft Main Bearing
Cylinder block connecting boltsLH side (A - D) 10 N-m (1.0 kgf-m, 7.2 ft-lb)
RH side (E - J) 10 N-m (1.0 kgf-m, 7.2 ft-lb)
LH side (A D) further 18 N-m (1.8 kgf-m, 13.3 ft-lb)
RH side (E J) further 18 N-m (1.8 kgf-m, 13.3 ft-lb)
LH side (A - D) further
(A), (C): Angle tightening 90°
(B), (D): Torque tightening 40 N-m (4.1 kgf-m, 29.5 ft-lb)
RH side (E - J) further
Tightening angle 90°
8 mm and 6 mm LH side (A - H)
(A) - (G) 25 N-m 2.5 degrees, kgf-m, 18.4 ft-lb)
(H) 6.4 N-m (0.7 kgf-m, 4.7 ft-lb)
Main bearing
#1, #3
Standard 1.998 - 2.011 mm (0.0787 - 0.0792 in)
0.03 mm (0.0012 in) US 2.017 - 2.020 mm (0.0794 - 0.0795 in)
0.05 mm (0.0020 in) US 2.027 - 2.030 mm (0.0798 - 0.0799 in)
0.25 mm (0.0098 in) US 2.127 - 2.130 mm (0.0837 - 0.0839 in)
Bearing size (Thickness at center)
#2, #4, #5
Standard 2.000 - 2.013 mm (0.0787 - 0.0793 in)
0.03 mm (0.0012 in) US 2.019 - 2.022 mm (0.0795 - 0.0796 in)
0.05 mm (0.0020 in) US 1 2.029 - 2.032 mm (0.0799 - 0.0800 in)
0.25 mm (0.0098 in) US 2.129 - 2.132 mm (0.0838 - 0.0839 in)