Removal and Replacement
StarterREMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the air intake chamber. (Non-turbo model)
3. Remove the intercooler. (Turbo model)
4. Remove the air intake chamber stay. (Non-turbo model)
- MT model
- AT model
5. Disconnect the connector (B) and terminal (A) from starter.
6. Remove the starter from transmission.
NOTE: For the MT model, a bolt is used in place (A).
INSTALLATION
Install in the reverse order of removal.
NOTE: For the MT model, a bolt is used in place (A).
