Installation

INSTALLATION

Install in the reverse order of removal.

CAUTION:
^ Use a new self-locking nut.
^ Ensure the stabilizer bushing and stabilizer have the same identification colors.
^ Install the stabilizer bushing (front crossmember side) while aligning it with the paint mark on stabilizer.
^ The stabilizer bracket has a set orientation. Install it with the arrow mark facing the upper side of the vehicle.





Tightening torque:

Stabilizer link:
45 N-m (4.6 kgf-m, 33.2 ft-lb)

Stabilizer bracket:
25 N-m (2.5 kgf-m, 18.4 ft-lb)