Installation

INSTALLATION

CAUTION:
^ Be sure to use anew flange nut and self-locking nut.
^ Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
^ Align the paint mark end of stabilizer to the end of stabilizer bushing when installing.





Install in the reverse order of removal.

Tightening torque:
Stabilizer link:
45 N-m (4.6 kgf-m, 33.2 ft-lb)

Stabilizer clamp:
40 N-m (4.1 kgf-m, 29.5 ft-lb)