Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1. ECM
1. On [[Main Menu]] display, select {Each System Check}.
2. On [[System Selection Menu]] display, select {Engine Control System}.
3. Select [OK] after the information of engine type is displayed.
4. On [[Engine Diagnosis]] display, select {Diagnostic Code(s) Display}.
5. On [[Diagnostic Code(s) Display]] display, select Current DTC} or {Past DTC}.

NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)

2. BODY INTEGRATED UNIT
1. On [[Main Menu]] display, select {Each System Check}.
2. On [[System Selection Menu]] display, select {Integ. Unit}.
3. After {Integ. unit} is displayed, select [OK].
4. On [[Integ. unit mode failure diag]] display, select Diagnostic Code(s) Display}.

NOTE:
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)