Cam Sprocket
Cam SprocketREMOVAL
NOTE:
Perform the work with the engine installed to body when replacing a single part.
1) Remove the V-belts.
2) Remove the crank pulley.
3) Remove the timing belt cover.
4) Remove the timing belt.
5) Remove the camshaft position sensor.
6) Fasten the cam sprocket and remove from the camshaft using ST.
ST 18231AA010 CAM SPROCKET WRENCH
NOTE:
CAM SPROCKET WRENCH (499207100) can also be used.
ST 499207400 CAM SPROCKET WRENCH
INSTALLATION
1) Fasten the cam sprocket and install to the camshaft using ST.
NOTE:
Do not confuse cam sprockets (LH) and (RH) during installation. They should be distinguished by the L or R indication.
ST 18231AA010 CAM SPROCKET WRENCH
NOTE:
CAMSHAFT SPROCKET WRENCH (499207100) can also be used.
Tightening torque:
78 Nm (8.0 kgf-m, 57.5 ft-lb)
ST 499207400 CAM SPROCKET WRENCH
Tightening torque:
78 Nm (8.0 kgf-m, 57.5 ft-lb)
2) Install the camshaft position sensor.
3) Install the timing belt.
4) Install the timing belt cover.
5) Install the crank pulley.
6) Install the V-belts.
INSPECTION
1) Check the cam sprocket teeth for abnormal wear and scratches.
2) Make sure there is no free play between cam sprocket and key.
3) Check the cam sprocket protrusion used for sensor for damage and contamination of foreign matter.