Center Mounted Brake Lamp: Testing and Inspection
High-mounted Stop LightINSPECTION
1. 4 DOOR MODEL (STANDARD TYPE)
1. Visually check the bulb for blow out.
2. Check the bulb specification. Specifications
3. If NG, replace the bulb with a new part.
2. EXCEPT FOR 4 DOOR MODEL (STANDARD TYPE)
1. Install the high-mounted stop light to test if it illuminates normally.
2. If the high-mounted stop light does not illuminate, replace it with a new part.
NOTE: Since LED (Light Emitting Diode) is used for the high-mounted stop light, replace the high-mounted stop light assembly if the LED burns out.