Tail/Stop Light Bulb
Tail/Stop Light BulbINSPECTION
1. 4 DOOR MODEL
1. Visually check the bulb for blow out.
2. Check the bulb specification. Specifications
3. If NG, replace the bulb with a new part.
2. 5 DOOR MODEL
1. Install the rear combination light assembly and check that it blinks normally.
2. If it does not blink normally, replace the rear combination light assembly with a new part.
NOTE: Since LED (Light Emitting Diode) is used for the tail light/stop light bulb, replace the rear combination light assembly if the LED burns out.