Curtain Airbag Sensor

Curtain Airbag Sensor

REMOVAL

1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the rear seat.
4. Remove the nuts and then remove the curtain airbag sensor.






5. Disconnect the airbag connector.

INSTALLATION

CAUTION:
- Do Not reuse the bolt and nut. Always use new bolts and nuts for them.
- When installing the sensor, securely insert the arrest pin on the back side of sensor into the body side hole.

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf.m, 5.5 ft.lb)