Rear Axle Removal

Rear Axle

REMOVAL

1) Disconnect the ground cable from the battery.
2) Lift up the vehicle, and then remove the rear wheels.
3) Lift the crimped section of axle nut.





4) Remove the axle nut using a socket wrench while depressing the brake pedal.

CAUTION:
Remove the wheel before loosening the axle nut. Failure to follow this rule may damage the wheel bearings.

5) Remove the brake hose bracket and the rear ABS wheel speed sensor.

^ Disc brake model





^ Drum brake model





6) Remove the disc brake caliper from the rear housing, and suspend it from the vehicle using a string. (Disc brake model)





7) Remove the rear disc rotor. (Disc brake model)
8) Remove the brake drum. (Drum brake model)
9) Remove the four bolts from the rear housing.





10) Remove the rear hub unit bearing.

CAUTION:
^ Be careful not to damage the magnetic encoder.
^ Do not get closer the tool which charged magnetism to magnetic encoder.








NOTE:
If it is hard to remove, use the ST.

ST1 926470000 AXLE SHAFT PULLER
ST2 28099PA110 AXLE SHAFT PULLER PLATE





11) Suspend the rear brake from the shock absorber. (Drum brake model)





12) Remove the snap pin and nut from the front lateral link.





13) Using a puller, separate the rear housing and ball joint.





14) Separate the upper arm, trailing link, and rear lateral link from the rear housing.





15) Remove the rear axle.