Power Window Switch: Service and Repair
POWER WINDOW CONTROL SWITCHREMOVAL
1. MAIN SWITCH
1. Disconnect the ground cable from battery.
2. Open the screw cover by using a flat tip screwdriver.
3. Remove the screw to remove the power window main switch panel.
NOTE: Remove it from the cutout portion at the tip of the switch panel.
4. Disconnect the harness connector.
5. Remove the screws to remove the power window main switch assembly.
2. SUB-SWITCH
1. Open the screw cover by using a flat tip screwdriver.
2. Remove the screw to remove the power window main switch panel.
NOTE: Remove it from the cutout portion at the tip of the switch panel.
3. Disconnect the harness connector.
4. Remove the screws to remove the power window sub-switch assembly.
INSTALLATION
Install in the reverse order of removal.