Air Cleaner Housing: Service and Repair

Air Cleaner Case

REMOVAL
1. Disconnect the ground cable from battery.






2. Remove the air intake duct.
3. Disconnect the connector from air flow and intake air temperature sensor.
4. Loosen the clamp (B) which connects the air intake boot and intake duct.
5. Remove the clip (C) from the air cleaner case (front).






6. Remove the air cleaner case (rear) and air intake boot.
7. Remove the air cleaner element.
8. Remove the bolt (A) and nut (B) which secure the air cleaner case (front) to the body.






9. Remove the air cleaner case (front).

INSTALLATION
1. Install the bolt (A) and nut (B) which secure the air cleaner case (front) to the body.






2. Install the air cleaner element.
3. Install the air cleaner case (rear) and air intake boot.

NOTE: When installing the air cleaner case (rear), align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.









4. Install the clip (B) to the air cleaner case (front).
5. Connect the connector (A) to the mass air flow and intake air temperature sensor.






6. Install the air intake duct.
7. Connect the ground cable to battery.