Clearing Diagnostic Trouble Codes

CLEAR MEMORY

1) On [Main Menu] display, select (Each System Check).
2) On [System Selection Menu] display, select (Tire pressure monitor).
3) After the (Tire pressure monitor). is displayed, select [OK].
4) On [Tire pressure monitor diagnosis] display, select (Clearing Memory).
5) When "Done" and "Turn off the ignition switch." are shown on the display screen, turn the Subaru Select Monitor and the ignition switch to OFF.

NOTE:
For details concerning the operation procedure, refer to "PC application help for Subaru Select Monitor". Read Diagnostic Trouble Code (DTC)