Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1) On [Main Men] display, select {Each System Check}.
2) On [System Selection Menu] display, select {Brake Control System}.
3) Click the [OK] button after {VDC} is displayed.
4) On [Brake Control Diagnosis] display, select {Diagnostic Code(s) Display}.
5) Record the DTC and data.

NOTE:
- Up to 3 DTCs are displayed in the order of detection.
- If a particular DTC is not stored in memory properly at the occurrence of problem (due to a drop in VDCCM&H/U power supply etc.), the DTC suffixed with a question mark "?" is displayed on Subaru Select Monitor display screen. This shows it may be an unreliable reading.