Fuel Injector: Service and Repair
Fuel InjectorREMOVAL
1. RH SIDE
1. Release the fuel pressure.
2. Disconnect the ground cable from battery.
3. Open the fuel filler lid and remove the fuel filler cap.
4. Remove the intake manifold.
5. Remove clamp (A) holding the fuel pipe protector RH to the engine harness, and remove the fuel pipe protector RH.
6. Remove the harness band (A) which holds the engine harness to the fuel injector pipe.
7. Disconnect the connector from fuel injector.
8. Remove the bolts which hold fuel injector pipe RH.
9. Remove the fuel injector while lifting up the fuel injector pipe RH.
2. LH SIDE
1. Release the fuel pressure.
2. Disconnect the ground cable from battery.
3. Open the fuel filler lid and remove the fuel filler cap.
4. Remove the intake manifold.
5. Remove the fuel pipe protector LH.
6. Remove the harness band (A) which holds the engine harness to the fuel injector pipe LH.
7. Disconnect the connector from fuel injector.
8. Remove the bolts which hold fuel injector pipe LH.
9. Remove the fuel injector while lifting up the fuel injector pipe LH.
INSTALLATION
1. RH SIDE
Install in the reverse order of removal.
NOTE: Use new O-rings.
2. LH SIDE
Install in the reverse order of removal.
NOTE: Use new O-rings.
