Installation

INSTALLATION

CAUTION:
^ Be sure to use a new flange nut and self-locking nut.
^ Always tighten the bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
^ Align the paint mark end of stabilizer to the end of bushing when installing.





Install in the reverse order of removal.

Tightening torque:
Stabilizer link
45 Nm (4.6 kgf-m, 33.2 ft-lb)

Stabilizer clamp
40 Nm (4.1 kgf-m, 29.5 ft-lb)