Back-Up Light Switch & Neutral Position Switch

Switches and Harness
REMOVAL
1. BACK-UP LIGHT SWITCH & NEUTRAL POSITION SWITCH
1. Disconnect the ground cable from the battery.
2. Remove the air intake chamber and intake boot. (Non-turbo model.
3. Remove the intercooler. (Turbo model.
4. Disconnect the connector back-up light switch & neutral position switch.
- Non-turbo model





- Turbo model





5. Lift up the vehicle.
6. Remove the back-up light switch & neutral position switch with the harness.





INSTALLATION
1. BACK-UP LIGHT SWITCH & NEUTRAL POSITION SWITCH
1. Install the back-up light switch & neutral position switch with the harness.
Tightening torque: 32.3 N-m (3.3 kgf-m, 23.8 ft-lb)





2. Connect the connectors of back-up light switch and neutral position switch.
3. Install the air intake chamber and intake boot. (Non-turbo model.
4. Install the intercooler. (Turbo model.
5. Connect the ground cable to battery.

INSPECTION
1. BACK-UP LIGHT SWITCH
Check the back-up light switch.

2. NEUTRAL POSITION SWITCH
1. Turn the ignition switch to OFF.
2. Disconnect the connector of neutral position switch.
3. Measure the resistance between neutral position switch terminals.
- Non-turbo model








- Turbo model








4. Replace faulty parts.