Read Diagnostic Trouble Code (DTC)

Read Diagnostic Trouble Code (DTC)

OPERATION

1. ECM
1. On the [[Main Menu]] display, select the {Each System Check}.
2. On the [[System Selection Menu]] display, select the {Engine Control System}.
3. Select the [OK] after the information of engine type is displayed.
4. On the [[Engine Diagnosis]] display, select the {Diagnostic Code(s) Display}.
5. On the [[Diagnostic Code(s) Display]]display, select the {Current DTC} or {Past DTC}.

NOTE:
- For detailed operation procedures, refer to the "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)

2. BODY INTEGRATED UNIT
1. On the [[Main Menu]] display, select the {Each System Check}.
2. On the [[System Selection Menu]] display, select the{Integ. Unit}.
3. After {Integ. Unit} is displayed, select [OK].
4. On the [[Integ. unit mode failure diag]] display, select the {Diagnostic Code(s) Display}.

NOTE:
- For detailed operation procedures, refer to the "PC application help for Subaru Select Monitor".
- For detailed concerning DTC, refer to the List of Diagnostic Trouble Codes (DTC). Immobilizer (Diagnostics)