With ABS
ABS Warning Light / Brake Warning Light Illumination PatternINSPECTION
1. When the ABS warning light and brake warning light do not illuminate in accordance with this illumination pattern, it can be thought that there is an electrical problem.
2. When the ABS warning light remains constantly OFF, check the combination meter circuit.
3. When ABS warning light does not go off, check the combination meter circuit.
4. When the brake warning light does not go off, check the brake warning circuit and the combination meter circuit.
NOTE: Even though the ABS warning light does not go off after approximately 1.5 seconds from ABS warning light illumination, the ABS function operates normally when the warning light goes off while driving at approximately 12 km/h (7 MPH). However, the ABS system does not work while the ABS warning light is illuminated.
ABS WARNING LIGHT DOES NOT COME ON
DETECTING CONDITION:
^ Defective combination meter
^ Defective harness
TROUBLE SYMPTOM: When the ignition switch is turned to ON (engine OFF), ABS warning light does not illuminate.
WIRING DIAGRAM:
Step 1-Step 4:
ABS WARNING LIGHT DOES NOT GO OFF
DETECTING CONDITION:
^ Defective combination meter
^ Open circuit in harness
TROUBLE SYMPTOM: When starting the engine, the ABS warning light is kept on.
WIRING DIAGRAM:
Step 1-Step 4:
BRAKE WARNING LIGHT DOES NOT GO OFF
DETECTING CONDITION:
^ Brake warning light circuit is shorted.
^ Defective sensor/connector
TROUBLE SYMPTOM: After starting the engine, the brake warning light remains lit though the parking lever is released.
WIRING DIAGRAM:
Step 1-Step 9:
