Operation CHARM: Car repair manuals for everyone.

Headlamp: Service and Repair

Headlight Assembly

REMOVAL

1. Disconnect the ground cable from the battery.
2. Remove the air intake duct. (When removing the headlight RH).






3. Remove the front bumper.
4. Disconnect harness connectors.
5. Remove the 7 bolts, disengage 1 clip, then detach the headlight assembly.






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf.m, 5.5 ft.lb)