License Plate Lamp: Service and Repair

License Plate Light Assembly

REMOVAL

1. SEDAN MODEL
1. Disconnect the ground cable from the battery.
2. Remove the trunk lid garnish.
3. Remove the trunk lid trim.
4. Turn and remove the bulb socket (A). Disengage clip (B) and remove the license plate light assembly.






2. WAGON MODEL
1. Disconnect the ground cable from the battery.
2. Remove the rear gate trim.
3. Disconnect the harness connector and remove the rear gate garnish.
4. Remove the license plate light from the rear gate garnish.

INSTALLATION

Install in the reverse order of removal.