Rear Gate Latch and Actuator Assembly
Rear Gate Latch and Actuator AssemblyREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the rear gate trim.
3. Disconnect the harness connector.
4. Remove the two bolts to remove the rear gate latch and actuator assembly.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: N.m (kgf.m, ft.lb)
T1: 7.5 (0.76, 5.5)
T2: 25 (2.5, 18.4)