Sunroof Assembly

SUNROOF ASSEMBLY

REMOVAL

CAUTION: When removing the clip, use great care not to damage the roof trim.

1. Disconnect the ground cable from battery.
2. Remove the roof trim.
3. Disconnect the harness connector of sunroof motor.
4. Remove the glass lid.
5. Remove the four drain tubes from frame assembly.
6. Remove the assist rail bracket (front) (A) and assist rail bracket (rear) (B).







7. Remove the curtain airbag module. (model with curtain airbag module)
8. Remove the attachment nuts and remove the frame assembly.







INSTALLATION

CAUTION: Be careful not to snag the harness.

Install in the reverse order of removal.

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.

Length A: 15 mm (0.59 in) or more