Sunroof / Moonroof: Testing and Inspection

SUNROOF CONTROL SYSTEM

INSPECTION







- Failure turn of glass lid while driving rough road.
Glass lid has auto-reverse function. When specified or more force is applied to the glass lid, the lid turns back and stops. When operating the glass lid (open or close) while driving the rough road, the lid judges vibration as a force and may causes failure turns. When the failure turn is occurred, need to perform the initialize operation with following procedure.

1. INITIALIZE OPERATION

1. Tilt up the glass lid.
2. Release the switch once, and press the tilt up switch again for 15 seconds.
3. When the glass lid is raised a little and returned to tilt up position, release the switch for the moment. (Initialization of position detecting function)
4. Keep pressing the tilt up switch within 5 seconds from releasing the switch. The glass lid will tilt down -> slides open -> slides close automatically. (When more than 5 seconds pass, the position detecting function is cancelled.)
5. Initialize operation is completed.

NOTE For procedure of each component in the sunroof control system, refer to the respective section.

- Glass lid
- Sunroof assembly
- Sunroof motor
- Sunroof switch
- Sunshade