Fog/Driving Lamp: Adjustments
Front Fog Light AssemblyADJUSTMENT
1. FOG LIGHT AIMING
1. Before checking the fog light beam level, be sure of the following:
- The area around the fog light has not sustained any accident, damage or other type of deformation.
- Vehicle is parked on a level surface.
- The inflation pressure of tires is correct.
- Vehicle's fuel tank is fully filled.
2. Bounce the vehicle several times to normalize the suspension.
3. Make certain that someone is seated in the driver's seat.
4. Disengage the two clips, and then turn over the mud guard.
5. Adjust the front fog light pattern by inserting a Philips screwdriver to the adjusting hole.
