Ignition Control Module: Testing and Inspection
Ignition Coil and Ignitor AssemblyINSPECTION
Check the secondary coil resistance using a tester. Replace if defective.
CAUTION:
- If the resistance is extremely low, it indicates the presence of a short-circuit.
- Ignitor is integrated with the coil. Therefore the resistance of primary side coil cannot be measured.
Specified resistance:
[Secondary side]
Between (A) and (B) 11.2 kohms ± 15%
Between (C) and (D) 11.2 kohms ± 15%
