Seat Temperature Element: Testing and Inspection
INSPECTION1. WIRING DIAGRAM
[Ref. to WI-86, WIRING DIAGRAM, Power Seat System.] Diagrams By Diagram Name
2. SEAT HEATER MODULE
Disconnect the connector of the seat heater module, and check for continuity between terminals in connector.
If there is no continuity, replace the seat heater module.
3. SEAT HEATER SWITCH
1. Perform the self-diagnosis of control panel. [Ref. to Diagnostic Chart for Self-diagnosis.] Diagrams By Diagram Name
2. Repair the harness between the seat heater module and the auto air conditioner control module.
3. Check the auto air conditioner control module. [Ref. to Auto A/C Control Module I/O Signal.] Diagrams By Diagram Name