Cam Sprocket
Cam SprocketREMOVAL
NOTE:
When replacing the single part, perform the work with the engine installed to body.
1) Remove the V-belts.
2) Remove the crank pulley.
3) Remove the chain cover.
4) Remove the timing chain assembly.
5) Remove the cam sprocket. To lock the camshaft, use the ST.
ST 499977500 CAM SPROCKET WRENCH
- Intake side
- Exhaust side
INSTALLATION
1) Install the cam sprocket. To lock the camshaft, use the ST.
Tightening torque: 29.5 N-m (3.0 kgf-m, 21.8 ft-lb)
2) Further tighten the bolt.
Tightening angle: 45 degrees± 5 degrees
ST 499977500 CAM SPROCKET WRENCH
- Intake side
- Exhaust side
3) Install the timing chain assembly.
4) Install the chain cover.
5) Install the crank pulley.
6) Install the V-belts.
INSPECTION
1) Check the cam sprocket teeth for abnormal wear and scratches.
2) Make sure there is no free play between cam sprocket and key.