Fuel Level Sensor
Fuel Level SensorREMOVAL
WARNING: Place "NO OPEN FLAMES" signs near the working area.
CAUTION:
- Be careful not to spill fuel.
- When the fuel gauge pointer is at two third or more, the fuel may spill out. Be sure to drain the fuel before the operation.
NOTE: The fuel level sensor is built in fuel pump assembly.
1. Remove the fuel pump assembly.
2. Disconnect the connector (A) from fuel pump bracket.
3. Remove the fuel temperature sensor (B).
4. Remove the fuel level sensor (C).
INSTALLATION
1. Attach the fuel level sensor (C).
2. Install the fuel temperature sensor (B).
3. Connect the connector (A) to fuel pump bracket.
4. Install the fuel pump assembly.