Assembly

ASSEMBLY

FRONT BUSHING

Assemble in the reverse order of disassembly.

CAUTION:
Install the front bushing in proper direction as shown in the figure.





REAR BUSHING

1) As shown in the figure below, install the rear bushing with its longer inner cylinder facing downward and the shorter facing upward, with the identification paint marking pointed down.





2) Align the center of rear bushing recess portion with the aligning mark on the front arm.





3) Using the ST and a press, install the rear bushing.

ST1 20299AG000 REMOVER
ST2 20299AG010 BASE