Timing Belt Cover
Timing Belt CoverREMOVAL
NOTE:
Perform the work with the engine installed to body when replacing a single part.
1) Remove the secondary air pump.
2) Remove the V-belts.
3) Remove the crank pulley.
4) Remove the timing belt cover LH (A).
5) Remove the timing belt cover RH (B) together with the engine harness cover.
6) Remove the front timing belt cover (C).
INSTALLATION
1) Install the front timing belt cover (C).
Tightening torque:
5 N.m (0.5 kgf-m, 3.7 ft-lb)
2) Install the timing belt cover RH (B) together with the engine harness cover.
Tightening torque:
5 N.m (0.5 kgf-m, 3.7 ft-lb)
3) Install the timing belt cover LH (A).
4) Install the crank pulley.
5) Install the V-belts.
6) Install the secondary air pump.
INSPECTION
Check the timing belt cover for damage.