Communication For Initializing Impossible

COMMUNICATION FOR INITIALIZING IMPOSSIBLE

DETECTING CONDITION:
Defective harness connector

TROUBLE SYMPTOM:
Communication is impossible between the tire pressure monitoring control module and the Subaru Select Monitor.

WIRING DIAGRAM:

Step 1-Step 2:

Step 3-Step 10:

Step 11-Step 12:

WITHOUT DTC

DETECTING CONDITION:
^ Defective combination meter
^ Defective harness

TROUBLE SYMPTOM:
^ Tire pressure warning light does not go off.
^ "No diagnostic Code Present" will be displayed on the Subaru Select Monitor.

NOTE:
When the tire pressure warning light is OFF and "No diagnostic Code Present" is displayed on Subaru Select Monitor, the system is operating properly.

WIRING DIAGRAM:

Step 1-Step 3: