Security and Locks

Security System

INSPECTION

BASIC DIAGNOSTIC PROCEDURE

Step 1-4:

Step 5-11:

NOTE: Check the function settings of the body integrated unit if any of the following symptoms appear. Basic Diagnostic Procedure
- The horn does not sound even when the security alarm is triggered and operating. As a cause, it is possible that the siren ON/OFF setting is set to ON in the customization function.
- The horn sounds when setting the security to ON (Monitoring condition) using the keyless transmitter. As a cause, it is possible that the impact sensor present (ON)/not present (OFF) setting is set to ON in the customization function though there is no impact sensor.