Clear Memory Mode
CLEAR MEMORY MODEOPERATION
1. ECM
1. On {{Main Menu}} display, select {Each System Check}.
2. On {{System Selection Menu}} display, select {Engine Control System}.
3. After engine type information is displayed, select [OK].
4. On {{Engine Diagnosis}} display, select {Clearing Memory}.
5. When "Done" is displayed on the display, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE:
- Initial diagnosis of electronic throttle control is performed after memory clearance. Wait for 10 seconds or more after turning the ignition switch to ON, and then start the engine.
- For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".
2. BODY INTEGRATED UNIT
1. On the {{Main Menu}}, select {Each System Check}.
2. On the {{System Selection Menu}}, select {Integ. Unit}.
3. After {Integ. Unit} is displayed, select [OK].
4. On the {{Integ. unit mode}}, select {Clear Memory}.
5. When "Done" is displayed on the display screen, end the Subaru Select Monitor and turn the ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".